首页资源分类嵌入式系统安卓 > CCM9N operating instruction

CCM9N operating instruction

已有 445117个资源

下载专区

上传者其他资源

    文档信息举报收藏

    标    签:CCM9N

    分    享:

    文档简介

    CCM9N operating instruction

    文档预览

    CCM9N DC Motor Speed Controller (PWM) CCM9N DC Motor Speed Controller allows controlling speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 5%-100%. The motor speed controller can provide a continuous current of 30A to your DC motor or other DC load. Main technical parameters: Input supply voltage: 10V-50VDC The maximum output power: 0.01-2000W The maximum continuous output current :30A; The overload and short circuit protecting current is 40A PWM frequency: 240Hz, 2.2kHz, 22kHz Duty Cycle adjustable: 5%-100% The operation environment temperature:-20℃-40℃ Specifications: Item size:108*55*38mm (size of the shell) Net weight:90g Operating instruction: 1. Connect your motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 10 to 50V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer. Important Notes An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is NOT reverse-polarity protected and will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes. PWM frequency selection PWM frequency Rated current 15A 20A 30A Noise NO YES LOW The torque with slow speed Large Equilibration Relatively small The appropriate motor High speed motor Such as:RS775 -- Low speed motor (speed lower than 3000rpm) PWM FREQUENCY SELECTION 10 to 50V DC SPEED (DUTY CYLE) CONTROL Wiring Diagram

    Top_arrow
    回到顶部
    EEWORLD下载中心所有资源均来自网友分享,如有侵权,请发送举报邮件到客服邮箱bbs_service@eeworld.com.cn 或通过站内短信息或QQ:273568022联系管理员 高进,我们会尽快处理。