pdf

EIA/ECA 364 36B

  • 1星
  • 日期: 2018-05-23
  • 大小: 133.6KB
  • 所需积分:1分
  • 下载次数:0
  • favicon收藏
  • rep举报
  • 分享
  • free评论
标签: 364

364

eia

eia

EIA STANDARD TP-36BDETERMINATION OF GAS-TIGHTCHARACTERISTICS TESTPROCEDURE FOR ELECTRICALCONNECTORS, AND OR CONTACTSYSTEMSEIA/ECA-364-36B(Revision of EIA-364-36A)

文档内容节选

B 6 3 4 6 3 A C E A I E EIA STANDARD ANSIEIA36436B2006 Approved September 7 2006 TP36B DETERMINATION OF GASTIGHT CHARACTERISTICS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND OR CONTACT SYSTEMS Revision of EIA36436A EIAECA36436B SEPTEMBER 2006 THE ELECTRONIC......

B 6 3 - 4 6 3 - A C E A I E / EIA STANDARD ANSI/EIA-364-36B-2006 Approved: September 7, 2006 TP-36B DETERMINATION OF GAS-TIGHT CHARACTERISTICS TEST PROCEDURE FOR ELECTRICAL CONNECTORS, AND OR CONTACT SYSTEMS (Revision of EIA-364-36A) EIA/ECA-364-36B SEPTEMBER 2006 THE ELECTRONIC COMPONENTS SECTOR OF THE ELECTRONIC INDUSTRIES ALLIANCE NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is considered to have International Standardization implication, but the International Electrotechnical Commission activity has not progressed to the point where a valid comparison between the EIA Standard and the IEC document can be made. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 5084-A formulated under the cognizance of the CE-2.0 National Connector Standards Committee. Published by: ©ELECTRONIC INDUSTRIES ALLIANCE 2006 Technology Strategy & Standards Department 2500 Wilson Boulevard Arlington, VA 22201 Catalog of EIA Electronic Industries Alliance Standards and Engineering Publications or call Global Engineering Documents, USA and Canada (1-800-854-7179) PRICE: Please refer to the current International (303-397-7956) All rights reserved Printed in U.S.A. http://www.kekaoxing.com PLEASE ! DON'T VIOLATE THE LAW! This document is copyrighted by the EIA and may not be reproduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call USA and Canada (1-800-854-7179), International (303-397-7956) i CONTENTS Introduction ............................................................................................................... Test specimen ............................................................................................................ Test resources ........................................................................................................... Scope ......................................................................................................................... Description ................................................................................................................ Preparation ................................................................................................................ Clause 1 1.1 2 2.1 Equipment ................................................................................................................. 2.2 Material ..................................................................................................................... 3 3.1 3.2 4 5 6 Table 1 Annex A Test specimen classes ............................................................................................... Test procedure ........................................................................................................... Details to be specified ............................................................................................... Test documentation ................................................................................................... Page 1 1 1 1 1 2 2 2 3 4 4 2 Informative ................................................................................................................ A-1 ii http://www.kekaoxing.com (This page left blank) iii
更多简介内容

推荐帖子

串口一次性发送14k数据,单片机如何接收
各位大神好,最近我在摸索bootloader的编写,卡在串口接收数据这一步了。 单片机是msp430,通过串口接收到文件数据并进行APP升级,文件数据在两个c文件都有处理。之前我测试的时候,LED文件数据只有400个字节,当时使用全局变量数组接收串口数据,这样的处理没问题。后来用日常工作的项目工程文件测试,它生成的txt文件有14k,而我的RAM只有4K,请问该如何接收这14k数据呢(当然也
luaffy 单片机
总结MSP430时钟设置及应用
在MSP430单片机中,一个时钟周期 = MCLK晶振的倒数。如果MCLK是8MHz,则一个时钟周期为1/8us。 一个机器周期 = 一个时钟周期,即430每个动作都能完成一个基本操作。 一个指令周期 = 1~6个机器周期,具体根据具体指令而定。 另外,指令长度只是一个存储单位,与时间没有必然的关系。 MSP430单片机的时钟模块主要包括:     三个时钟:辅助时钟ACLK 、主时钟M
fish001 微控制器 MCU
总结MSP430时钟设置及应用
在MSP430单片机中,一个时钟周期 = MCLK晶振的倒数。如果MCLK是8MHz,则一个时钟周期为1/8us。 一个机器周期 = 一个时钟周期,即430每个动作都能完成一个基本操作。 一个指令周期 = 1~6个机器周期,具体根据具体指令而定。 另外,指令长度只是一个存储单位,与时间没有必然的关系。 MSP430单片机的时钟模块主要包括:     三个时钟:辅助时钟ACLK 、主时钟M
fish001 微控制器 MCU
BRD板和LIB库之间LIB库和LIB库之间的封装和焊盘差异
  程序功能:验证BRD板和LIB库之间,SIP板和LIB库之间,MCM板和LIB库之间的封装和焊盘差异,验证LIB库和LIB库之间的封装和焊盘差异。 在设计中经常存在,封装名称或者焊盘名称相同,但实际尺寸信息不同的情况,通过人工难以识别,一旦封装和焊盘调错,会造成不可估量的损失。Cadence官方也无这方面的对比工具。该工具填补了Cadence的功能空白,可以用于ALLEGRO、SI
yepeda PCB设计
【树莓派4B测评】+ 散热改装及系统设置
本帖最后由 sylar^z 于 2020-8-23 21:13 编辑     在淘宝上买的树莓派配件到了,上个图。     带双风扇的散热套件,5V3A的电源,带开关的USB TYPE-C线,micro HDMI转HDMI转接头,HDMI线,HDMI转VGA线。这里还有一条micro HDMI接HDMI的线没在里面。SD卡、U盘和移动硬盘都是以前买的,家伙都到齐了。     
sylar^z 开发板测评专版
有奖直播报名|如何选择一颗合适的车用MOSFET
直播时间:9月22日(周二)上午10:00-11:30 直播主题:如何选择一颗合适的车用MOSFET 直播简介 MOFSET看似简单,其实背后有很多玄机。9月22日,英飞凌将携手合作伙伴英恒电子,向各位工程师在线直播,教您如何在工作中选择一颗合适的车用MOFSET。 本次活动将聚焦于英飞凌MOFSET在汽车上的应用,包括如何理解英飞凌MOFSET的参数、设计与考虑、损耗的计
EEWORLD社区 汽车电子

评论

登录/注册

意见反馈

求资源

回顶部

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved
$(function(){ var appid = $(".select li a").data("channel"); $(".select li a").click(function(){ var appid = $(this).data("channel"); $('.select dt').html($(this).html()); $('#channel').val(appid); }) })