超过460,000+ 应用技术资源下载
pdf

IEEE 802.11 2016版标准

  • 1星
  • 日期: 2018-06-06
  • 大小: 32.83MB
  • 所需积分:5分
  • 下载次数:4
  • favicon收藏
  • rep举报
  • 分享
  • free评论
标签: wifiwlan802.11

最新IEEE 802.11 2016版标准

文档内容节选

IEEE Standard for Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11 Wireless LAN Medium Access Control MAC and Physical Layer PHY Specifications IEEE Computer Society Sponsored by the LANMAN Standards Committee IEEE 3 Park Avenue New York NY 100165997 USA IEEE Std 802112016 Revision of IEEE Std 802112012 Authorized licensed use limited to SHANGHAI UNIVERSI......

IEEE Standard for Information technology— Telecommunications and information exchange between systems Local and metropolitan area networks— Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications IEEE Computer Society Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Std 802.11™-2016 (Revision of IEEE Std 802.11-2012) Authorized licensed use limited to: SHANGHAI UNIVERSITY. Downloaded on June 01,2018 at 02:16:27 UTC from IEEE Xplore. Restrictions apply. IEEE Std 802.11™-2016 (Revision of IEEE Std 802.11-2012) IEEE Standard for Information technology— Telecommunications and information exchange between systems Local and metropolitan area networks— Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Prepared by the 802.11 Working Group of the LAN/MAN Standards Committee of the IEEE Computer Society Approved 7 December 2016 IEEE-SA Standards Board Authorized licensed use limited to: SHANGHAI UNIVERSITY. Downloaded on June 01,2018 at 02:16:27 UTC from IEEE Xplore. Restrictions apply. Abstract: Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2012 and 2013 have also been incorporated into this revision. Keywords: 2.4 GHz, 256-QAM, 3650 MHz, 4.9 GHz, 5 GHz, 5.9 GHz, 60 GHz, advanced encryption standard, AES, audio, beamforming, carrier sense multiple access/collision avoidance, CCMP, channel switching, clustering, contention based access period, Counter mode with Cipher- block chaining Message authentication code Protocol, confidentiality, CSMA/CA, DFS, direct link, directional multi-gigabit, dynamic allocation of service period, dynamic extension of service period, dynamic frequency selection, dynamic truncation of service period, E911, EDCA, emergency alert system, emergency services, fast session transfer, forwarding, GCMP, generic advertisement service, high throughput, IEEE 802.11™, international roaming, interworking, interworking with external networks, LAN, local area network, MAC, management, measurement, medium access control, media-independent handover, medium access controller, mesh, MIH, millimeter-wave, MIMO, MIMO-OFDM, multi-band operation, multi-hop, multi-user MIMO, multiple input multiple output, network advertisement, network discovery, network management, network selection, noncontiguous frequency segments, OCB, path-selection, personal basic service set, PHY, physical layer, power saving, QoS, quality of service, quality-of-service management frame, radio, radio frequency, RF, radio resource, radio management, relay operation, spatial sharing, SSPN, subscriber service provider, television white spaces, TPC, transmit power control, video, wireless access in vehicular environments, wireless LAN, wireless local area network, WLAN, wireless network management, zero-knowledge proof The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright © 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 14 December 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated. Print: PDF: ISBN 978-1-5044-3646-5 ISBN 978-1-5044-3645-8 STD22369 STDPD22369 IEEE Prohibits discrimination, harassment, and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Authorized licensed use limited to: SHANGHAI UNIVERSITY. Downloaded on June 01,2018 at 02:16:27 UTC from IEEE Xplore. Restrictions apply. Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html. Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Docu- ments IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers and users of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non- infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Authorized licensed use limited to: SHANGHAI UNIVERSITY. Downloaded on June 01,2018 at 02:16:27 UTC from IEEE Xplore. Restrictions apply. Copyright © 2016 IEEE. All rights reserved. 3 Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Authorized licensed use limited to: SHANGHAI UNIVERSITY. Downloaded on June 01,2018 at 02:16:27 UTC from IEEE Xplore. Restrictions apply. Copyright © 2016 IEEE. All rights reserved. 4
更多简介内容

推荐帖子

[分享]详细介绍802.11标准的最新进展
[分享]详细介绍802.11标准的最新进展近一两年已有广泛应用的无线局域网(WLAN)是一种低成本德无线接入技术,作为GPRS或 cdma2000的补充技术,或新的家庭联网方式,它使越来越多的设备供应商涉足此领域。目前应用得比较成功得WLAN技术是802.11,此标准虽然已经经历了十多年的发展,但目前仍在不断的改进和发展之中,以适应安全认证、漫游和QoS等方面的要求。      802.11b和8
fengzhang2002 RF/无线
物联网催生无线技术新标准802.11ah
着眼于物联网(InternetofThings,IoT)的发展前景,业界正致力于研究从无线充电到毫米波雷达等一切应用的各种新兴无线技术;根据比利时微电子研究中心(IMEC)的研究人员们表示,目前的最新任务就涉及了其中的几项连网标准。新的802.11ah标准用于1km范围内执行超过900MHz的低功率Wi-Fi,是最被看好的新式无线电。「我们认为这项新标准是IoT应用于具有Wi-Fi路由器的智慧家庭
Aguilera RF/无线
《802.11 无线网络权威指南 (第2 版)》508页,PDF
replyreload += ',' + 1812437; 本帖最后由 dontium 于 2015-1-30 14:33 编辑 最近一直在考虑网络编程的问题。所以找了很多东西,觉得这本书很好,中译本,特向大家分享 下载内容回复可见,别怪我,你回复一次还可以挣点工分。 如果你确实不愿意回复但又想下载,到EE的资源下载中心去,随后给你个链接 书中只做了少部分书签
dontium RF/无线
802.11x中定义的WIFI性能与可使用WIFI信道简述
      无线局域网WIFI技术基本上已经是现代社会中每个人天天需要使用的东西。WIFI由于采用了802.11系列协议,因此也有人把WIFI技术简称为了802.11技术。各个802.11X系列协议中所定义的参数指标如下:       在现阶段来说,我们日常经常使用到的WIFI 802.11技术常见的有802.11a、b、g、n和ac。它们目前主要分别独立工作在2.4 GHz和5GHz两个频段范围
Jacktang RF/无线
802.11ax凭什么战胜了802.11ad?(转)
       在确定第六代的WiFi协议标准的时候,有一段时间,大家都认为会是802.11ad协议。802.11ad Wi-Fi的数据吞吐量最高为4600Mbps,比当时的802.11ac快四倍。802.11ad 并非由 IEEE 发布,而是由WiGig联盟创建。  802.11ad在2009年正式宣布,然后于2011年与IEEE合作进入草案阶段,最后在WiGig联盟与WiFi联盟在2013年合并
Jacktang RF/无线
wlan和wifi这二种上网方式的具体意思以及区别
很多人在上网时就会发现家里用的电脑无线上网是WLAN,而手机或是平板电脑上网又叫WIFI。都是一样的无线上网,怎么会有二个不同的名字,那么wlan和wifi的意思是什么呢?wlan和wifi的的区别又在那里?下面我们就介绍一下这二种上网方式的具体意思及wlan和wifi的区别。   什么是WLAN   wlan(Wireless Local Area Networks)意思是无
Aguilera RF/无线

评论

+20 下载积分

个人中心

意见反馈

求资源

回顶部

下载专区

电源设计技术资料
点击获取

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

EEWorld电子技术资料下载——分享有价值的资料

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved
$(function(){ var appid = $(".select li a").data("channel"); $(".select li a").click(function(){ var appid = $(this).data("channel"); $('.select dt').html($(this).html()); $('#channel').val(appid); }) })