首页资源分类PCB layout > Vishay 无感电阻模型参数

Vishay 无感电阻模型参数

已有 445117个资源

下载专区

文档信息举报收藏

标    签:无感电阻model

分    享:

文档简介

这是Vishay无感电阻的模型

文档预览

www.vishay.com FC Vishay Dale Thin Film High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip FC series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of frequencies. The specialized laser edge trimming allows for precision tolerances to 0.1 %. FEATURES • Small standard size 0402 case size • Edge trimmed block resistors • High purity alumina substrate • Ohmic range (10  to 1000 ) Available Available • Small internal reactance (< 10 m) • Low TCR (down to ± 25 ppm/°C) Available • Epoxy bondable termination available Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. APPLICATIONS • Low noise amplifiers • Attenuation • Line termination STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Passivated nichrome Resistance Range 10  to 1000  TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C Tolerance: Absolute ± 0.1 % to ± 5.0 % Stability: Absolute R ± 0.02 % Stability: Ratio - Voltage Coefficient 0.1 ppm/V Working Voltage 30 V to 75 V Operating Temperature Range -55 °C to +155 °C Storage Temperature Range -55 °C to +155 °C Noise < -35 dB Shelf Life Stability: Absolute R ± 0.01 % CONDITIONS - Case size dependent -55 °C to +125 °C +25 °C 2000 h at 70 °C 1 year at +25 °C COMPONENT RATINGS CASE SIZE 0402 0505 0603 0805 1005 1206 POWER RATING (mW) 50 125 125 200 250 330 WORKING VOLTAGE (V) 30 37 50 50 75 75 RESISTANCE RANGE () 10 to 1000 20 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 Revision: 07-Aug-14 1 Document Number: 60093 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com FC Vishay Dale Thin Film DIMENSIONS in inches (millimeters) D T E L D T W L CASE SIZE LENGTH WIDTH THICKNESS TOP PAD BOTTOM PAD W (± 0.005) TYPICAL D (± 0.005) E (± 0.005) 0402 0.042 ± 0.008 (1.067 ± 0.203) 0.022 (0.559) 0.015 (0.381) 0.010 (0.254) 0.010 (0.254) 0505 0.055 ± 0.006 (1.397 ± 0.152) 0.050 (1.270) 0.015 (0.381) 0.010 (0.254) 0.015 (0.381) 0603 0.064 ± 0.006 (1.626 ± 0.152) 0.032 (0.813) 0.015 (0.381) 0.012 (0.305) 0.015 (0.381) 0805 0.080 ± 0.006 (2.032 ± 0.152) 0.050 (1.270) 0.015 (0.381) 0.016 ± 0.008 (0.406 ± 0.203) 0.015 (0.381) 1005 0.105 ± 0.008 (2.667 ± 0.203) 0.050 (1.270) 0.015 (0.381) 0.015 (0.381) 0.015 (0.381) 1206 0.126 ± 0.008 (3.200 ± 0.203) 0.063 (1.600) 0.015 (0.381) 0.020 + 0.005/- 0.010 (0.508 + 0.127/- 0.254) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Terminations Lead (Pb)-free Option Tin/Lead Option Lead (Pb)-free Finish and Tin/Lead Passivated nichrome Alumina Pre-soldered or gold 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Sn63 Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FC1206E1001BBTS F C 1 2 0 6 E 1 0 0 1 B B T S F C 1 2 0 6 K 1 0 0 0 B T B S T S GLOBAL CASE TCR MODEL SIZE CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION (1, 2 or 3 digits) PACKAGING FC 0402 E = 25 ppm/°C The first 3 digits B = 0.1 % T = Top sided Au (gold) term BS = BULK 0505 H = 50 ppm/°C are significant D = 0.5 % Au over Ni epoxy bondable 100 min., 1 mult 0603 K = 100 ppm/°C figures and the last F = 1 % RoHS compliant - e4 WS = WAFFLE 0805 digit specifies the G = 2 % B = Wraparound Sn/Pb solder 100 min., 1 mult 1005 number of zeros to J = 5 % 63 % Sn/37 % Pb w/nickel 1206 follow. “R” barrier TAPE AND REEL designates the G = Wraparound Au over Ni (gold) T0 = 100 min., 100 mult decimal point. termination epoxy bondable T1 = 1000 min., 1000 mult (1) RoHS compliant - e4 T3 = 300 min., 300 mult Example: TB = Top sided Sn/Pb solder T5 = 500 min., 500 mult 10R0 = 10  63 % Sn/37 % Pb w/nickel TF = Full reel 1000 = 100  barrier TS = 100 min., 1 mult 1001 = 1 k TBS = Top sided lead (Pb)-free solder w/nickel barrier RoHS compliant - e1 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/0.5 %Cu RoHS compliant - e1 Historical Part Number example: FC1206E1001BBT (for reference purposes only) FC 1206 E 1001 B B T SERIES CASE SIZE TCR CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING Note (1) Preferred packaging code Revision: 07-Aug-14 2 Document Number: 60093 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com FC Vishay Dale Thin Film TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL AND TESTING C LC R L C: Internal shunt capacitance L : Internal inductance R: Resistance LC: External connection inductance Cg: External capacitance to ground LC Cg Cg Lumped Equivalent Circuit Reference plane is at the resistor-bonding pad interface. The lumped circuit above was used to model the data at the bonding pad-resistor reference plane. High frequency testing was performed by Modelithics, Inc. on parts mounted to quartz test boards. Quartz test boards were chosen to minimize the contribution of the board effects at high frequencies. INTERNAL IMPEDANCE 0402 Flip chip |Zin|/R 1.8 C = 0.0262 pF 1.6 L = 0.00189 nH 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.1 1 0402 Wraparound |Zin|/R 1.8 C = 0.0392 pF 1.6 L = 0.1209 nH 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.1 1 0603 Flip chip 50 Ω 75 Ω 100 Ω 1000 Ω 250 Ω 500 Ω 10 Frequency (GHz) |Zin|/R 1.8 C = 0.0403 pF 1.6 L = 0.0267 nH 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.1 1 50 Ω 75 Ω 100 Ω 1000 Ω 500 Ω 10 Frequency (GHz) 50 Ω 100 Ω 250 Ω 1000 Ω 500 Ω 10 Frequency (GHz) Revision: 07-Aug-14 3 Document Number: 60093 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com FC Vishay Dale Thin Film DERATING CURVE 100 Percent of Rated Power 80 60 40 20 0 0 20 40 60 70 80 100 125 140 155 Ambient Temperature °C VSWR FC Series 0402 size 50 Ω 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Frequency (GHz) VSWR FC Series 0402 size 100 Ω 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Frequency (GHz) Revision: 07-Aug-14 4 Document Number: 60093 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000

Top_arrow
回到顶部
EEWORLD下载中心所有资源均来自网友分享,如有侵权,请发送举报邮件到客服邮箱bbs_service@eeworld.com.cn 或通过站内短信息或QQ:273568022联系管理员 高进,我们会尽快处理。