The input span of the CS5516/CS5520 AIN input signal is determined by a combination ofthe instrumentation amplifier gain (X25), the programmable amplifier gain setting (1,2,4 or 8),and the magnitude of the voltage between the VREF+ and VREF- pins. The voltage into theVREF pins can range from 2.0 to 3.8 volts and is determined by the resistor divider ratioselection of the resistor network which divides down the bridge excitation voltage. TheCDB5516 and CDB5520 evaluation boards come with resistors which divide the excitationsupply (nominally 10 volts total) down to 2.5 volts between the VREF+ and VREF- input pins.This 2.5 volt reference input is divided by the PGA gain setting and by the X25instrumentation amplifier gain to determine the nominal full scale input span to the converter.For example, if the PGA gain is set for a gain of 8, then the input span to the instrumentationamplifier will be 2.5 volts (VREF+ - VREF-) divided by 8 X 25, or 2.5/(200) = 12.5 mVnominal in unipolar mode, or ± 12.5 mV nominal in bipolar mode.
猜您喜欢
推荐内容
开源项目推荐 更多
热门活动
热门器件
用户搜过
随便看看
热门下载
热门文章
热门标签
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
评论