Notes on using the UCB1400After power-up, a reset should be applied to UCB1400 as soon as possible to bring the chip to the default state.This is achieved by performing a complete cold reset sequence (i.e., with both SDATA_OUT and SYNC held atlogic LOW, hold the RESET pin to logic LOW for at least 1 ms and then transition to a logic HIGH).
猜您喜欢
推荐内容
开源项目推荐 更多
热门活动
热门器件
用户搜过
随便看看
热门下载
热门文章
热门标签
评论