PRODUCT BRIEF
VC0702 TV Camera Processor
Key Features
Low Power Design
Support CMOS/CCD Sensor
Interlace and Progressive
NTSC/PAL Output Support
Color/BW video conversion
Motion Detection
10-bits ISP/IPP
Build-in Video DAC
General Description
VC0702 is Vimicro’s high performance video camera device designed for
all applications requiring small footprint, low voltage, low power
consumption, low cost, and color video cameras. It supports CCD/CMOS
sensor interface, PAL/NTSC composite video output, RGB/YCbCr
component video output, as well as S-Video output. VC0702 can directly
interface with a VCR, TV monitor, CRT PC monitor or other 75ohm
devices.
VC0702 is designed for very low power operation. It requires only a single
3.3V DC power supply. VC0702 also provides motion-detection and
motion-trigger functions for automatic surveillance applications. A
minimum set of external components is required to complete a fully
functional camera subsystem, such as security monitor, surveillance camera,
vision-enabled toy, digital camcorder, medical equipment, video phone,
video conference system, etc.
VC0702 General Features
Single-chip CCD/CMOS color or Black & White video camera
Low power design with single 3.3V power supply
Multiplex
interlaced or progressive
output format
Composite video: NTSC or PAL
Component Video: RGB or YCbCr
(VC0702PLDA only)
S-Video
(VC0702PLDA only)
10-bit Image Signal Processor
Auto Exposure (AE)
Auto White Balance (AWB)
Auto Gain Control (AGC)
Auto bad pixel detection and cancellation
Auto flicker detection and cancellation
Auto lens shading compensation
Configurable image noise reduction
Configurable image sharpness enhancement
Configurable gamma and color correction
Configurable brightness, color saturation, and hue
Edge-adaptive CFA interpolation
Up to 16 windows for statistical collection, exposure
Color/BW video image auto/manual conversion
Up to 16 windows auto motion detection supply
Image post-processor to support size from VGA/CIF to NTSC/PAL or bypass
Built-in 3CH 10bit generic video DAC
Copyright© Vimicro 2006
www.vimicro.com
Page 1 of 3
PRODUCT BRIEF
EEPROM programmable
Build-in 8 bit MCU
GPIO supply typical control function
Block Diagram
MCU
8 -比
特
IP P
微处理器
传感器接口
电
S
路
I P
ROM
V id e o D A C
U S B 2 .0
控 制
T V
其 电
器
E ncoder
路单元
V o lta e
电 压 变
g
换
R e
模 块
te r
g u la
S RA M
R AM
串行接口
电路
S en sor
I n te r fa c e
F r a m e R a te
C o n tr o l
CPM
V C 0702
Ordering information
Product No.
VC0702NJEA
VC0702PLDA
Package Info
QFN 40-pin 6.5*5.5mm
LQFP 48-pin 7*7mm
Contact Information
For more details, please visit our website http://www.vimicro.com/ or contact our world wide sales offices.
Vimicro Corporation is a China-based semiconductor company providing chips and solutions that enable multimedia communication and
applications. Vimicro is a market leader in imaging processors for PC and Mobile devices. Vimicro is now focused on offering next
generation multimedia technologies for PC and mobile phones markets. Our latest multimedia processors will combine all the
functionalities of both the imaging/video/graphics and sound/audio/music processors, allowing for future applications such as Multimedia
Messaging Services ("MMS"), mobile imaging, mobile ring-tone, mobile music, mobile flash, mobile video and mobile games.
Vimicro Corporation Headquarter:
Worldwide Sales Office:
15F, Shining Tower,
35 Xueyuan Road, Haidian District,
Beijing, 100083,
P. R. China
Tel:
86-10-6894-8888;
Fax:
86-10-6894-4075
Mountain View, USA
Tel:
1-650-966-1882;
Fax:
1-650-966-1885.
Shanghai, PRC.
Tel:
86-21-5080-7000;
Fax:
86-21-508-07611
Shenzhen, PRC.
Tel:
86-755-2671-9818;
Fax:
86-755-2671-9539
Copyright© Vimicro 2006
www.vimicro.com
Page 2 of 3
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
评论