AD104
Altium Designer
专业售后培训
专业售后培训
Version 1.0
1
Software, documentation and related materials:
Copyright © 2014 Altium Limited.
All rights reserved. You are permitted to use this document provided that (1) the use of such is for personal use only and will
not be copied or posted on any network computer or broadcast in any media, and (2) no modifications of the document is
made. Unauthorized duplication, in whole or part, of this document by any means, mechanical or electronic, including
translation into another language, except for brief excerpts in published reviews, is prohibited without the express written
permission of Altium Limited. Unauthorized duplication of this work may also be prohibited by local statute. Violators may
be subject to both criminal and civil penalties, including fines and/or imprisonment. Altium, Altium Designer, Board Insight,
Design Explorer, DXP, LiveDesign, NanoBoard, NanoTalk, P-CAD, SimCode, Situs, TASKING, and Topological
Autorouting and their respective logos are trademarks or registered trademarks of Altium Limited or its subsidiaries. All
other registered or unregistered trademarks referenced herein are the property of their respective owners and no trademark
rights to the same are claimed.
专业售后培训
Version 1.0
2
目½
课件
1: MCAD
集成
1.1
1.1.1
1.1.2
1.1.3
13
ECAD
与
MCAD
交互介绍........................................................................
13
STEP
格式整合
.......................................................................................................... 13
链接
STEP
模型文件
.................................................................................................. 13
建立监控文件夹
.......................................................................................................... 13
1.2
1.3
放½和链接
STEP
模型到
PCB
文档
......................................................... 14
1.2.1
导入外壳和电路板外½的
STEP
模型
......................................................................... 15
定向和定½
STEP
模型
............................................................................. 16
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
从端点添加捕捉点
...................................................................................................... 17
移除捕捉点
................................................................................................................. 17
定向并放½
3D
½
....................................................................................................... 18
放½
3D
½
.................................................................................................................. 18
设½
3D
½高度...........................................................................................................
19
测量距离
..................................................................................................................... 19
贴合电路板表面
.......................................................................................................... 19
1.4
从
Altium Designer
中导出
PCB
的
MCAD
数据
..................................... 20
1.4.1
1.4.2
导出
PCB
文档为
STEP
文件
..................................................................................... 20
导出
PCB
文档为
DWG/DXF
文件
.............................................................................. 22
1.5
3D
½放½快捷键
...................................................................................... 22
24
课件
2:
定义
PCB
板框外½
2.1
2.2
创建修改板框外½
.................................................................................... 24
定义板框外½
........................................................................................... 24
2.2.1
2.2.2
2.2.3
2.2.4
½用
3D
½定义板框外½
............................................................................................ 24
½用多边½定义板框外½
........................................................................................... 25
把选中对象定义为板框外½
........................................................................................ 25
从
DXF
文件定义板框外½.........................................................................................
26
2.3
2.4
2.5
编辑板框外½
........................................................................................... 27
2.3.1
编辑板½端点
............................................................................................................. 27
设½板框
Keepout
区域
........................................................................... 27
设½板框
Cutout ...................................................................................... 27
29
课件
3: PCB
栅格、向导和选项
3.1
3.2
访问统一光标捕获系统
............................................................................. 29
用户可定义的栅格
.................................................................................... 30
3.2.1
3.2.2
访问栅格管理器
.......................................................................................................... 31
创建和定义笛卡尔坐标栅格
........................................................................................ 31
Settings ........................................................................................................................... 33
Steps .............................................................................................................................. 33
Origin .............................................................................................................................. 34
Display ............................................................................................................................ 34
3
3.2.2.1
3.2.2.2
3.2.2.3
3.2.2.4
专业售后培训
Version 1.0
3.2.2.5
3.2.2.6
Extents ............................................................................................................................ 34
Quadrants ....................................................................................................................... 34
Steps .............................................................................................................................. 36
Angular Range ................................................................................................................ 37
Radial Range .................................................................................................................. 37
3.2.3
创建和定义极坐标栅格
............................................................................................... 34
3.2.3.1
3.2.3.2
3.2.3.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.2.9
3.2.10
3.2.11
默认的捕获栅格
.......................................................................................................... 37
复制一个栅格
............................................................................................................. 37
定义栅格用途
............................................................................................................. 37
定义栅格显示
............................................................................................................. 38
嵌套和栅格优先级
...................................................................................................... 39
禁用一个栅格
............................................................................................................. 40
导出和导入栅格
.......................................................................................................... 41
删除一个栅格
............................................................................................................. 41
3.3
捕获向导
................................................................................................... 42
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
定义一个捕获向导
...................................................................................................... 42
复制捕获向导
............................................................................................................. 43
禁用捕获向导
............................................................................................................. 43
导出和导入捕获向导
.................................................................................................. 43
删除捕获向导
............................................................................................................. 44
3.4
对象捕获点
............................................................................................... 44
3.4.1
3.4.2
捕获到对象热点
Snap To Object Hotspots ................................................................ 44
捕获到对象½线
Snap To Object Axis ........................................................................ 44
3.5
其它的电路板选项
.................................................................................... 46
3.5.1
3.5.2
3.5.3
3.5.4
Measurement Unit ..................................................................................................... 47
Designator Display ..................................................................................................... 47
Route Tool Path ......................................................................................................... 47
Sheet Position ............................................................................................................ 47
课件
4:
类
4.1
4.2
4.3
49
结构类概念
............................................................................................... 49
自动创建
(结构)
类
.................................................................................. 50
4.2.1
Comparator
和
ECO Generation
报告
..................................................................... 50
手动定义结构类
........................................................................................ 51
4.3.1
4.3.2
添加选中的对象
.......................................................................................................... 53
元件类生成器
............................................................................................................. 53
4.4
从原理图创建类
........................................................................................ 54
4.4.1
4.4.2
Net Class Directive .................................................................................................... 54
指定元件类
................................................................................................................. 55
4.5
4.6
浏览类的结构层次
.................................................................................... 55
在逻辑查询语句中½用结构类
.................................................................. 55
57
课件
5: Rooms
5.1
5.1.1
5.1.2
专业售后培训
Version 1.0
放½
Room ............................................................................................... 57
放½矩½
Room .......................................................................................................... 57
放½多边½
Room ...................................................................................................... 57
4
5.1.3
½用菜单或工具栏½令创建
Room ............................................................................. 57
5.2
关联元器件
............................................................................................... 59
5.2.1
5.2.2
5.2.3
自动关联元器件
.......................................................................................................... 59
手动关联元器件
.......................................................................................................... 59
编译器生成
Room ...................................................................................................... 59
5.3
编辑
Room ............................................................................................... 60
5.3.1
非图½化编辑
............................................................................................................. 60
通过属性对话框编辑
....................................................................................................... 60
通过
PCB Inspector
面板编辑
......................................................................................... 61
通过
PCB List
面板编辑
.................................................................................................. 61
改变
Room
的大小和½½
................................................................................................ 61
改变
Room
的外½
.......................................................................................................... 62
分割
Room ...................................................................................................................... 62
分割步骤
......................................................................................................................... 63
5.3.1.1
5.3.1.2
5.3.1.3
5.3.2
图½化编辑
................................................................................................................. 61
5.3.2.1
5.3.2.2
5.3.2.3
5.3.2.4
5.3.3
包围
Room ................................................................................................................. 63
5.4
5.5
5.6
备注
.......................................................................................................... 64
复制
Room
格式
....................................................................................... 65
隐藏
Room ............................................................................................... 65
67
课件
6: PCB
查询和
PCB Filter
面板
6.1
6.2
6.3
6.4
访问面板
................................................................................................... 67
面板构成
................................................................................................... 67
定义过滤范围
........................................................................................... 68
定义查询语句
........................................................................................... 68
6.4.1
6.4.2
6.4.3
Query Helper.............................................................................................................. 68
Query Builder ............................................................................................................. 69
查询表达式的运算符优先级
........................................................................................ 70
6.5
6.6
6.7
6.8
6.9
执行过滤
................................................................................................... 70
复用以往的过滤表达式
............................................................................. 71
6.6.1
查询表达式实例
.......................................................................................................... 72
创建设计规则
........................................................................................... 73
清除过滤器
............................................................................................... 73
其它的非面板过滤
.................................................................................... 74
75
课件
7: 3D
安全间距检查
7.1
7.1.1
7.1.2
检查元件安全间距的设计规则
.................................................................. 75
元器件安全间距规则
.................................................................................................. 75
约束
................................................................................................................................ 76
7.1.1.1
应用安全间距规则
...................................................................................................... 77
7.2
执行安全间距检查
- DRC......................................................................... 77
专业售后培训
Version 1.0
5
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
评论