热搜关键词: 电路基础ADC数字信号处理封装库PLC

pdf

CSR8811 技术资料

  • 1星
  • 2016-03-07
  • 1.61MB
  • 需要1积分
  • 1次下载
标签: CSR8811

CSR8811

技术资料

技术资料

CSR8811  技术资料

文档内容节选

Features Dualmode BluetoothBluetooth low energy radio Fully qualified Bluetooth v40 IC Can form part of Bluetooth v40 HS system Class 1 or Class 2 Bluetooth power levels Highsensitivity Bluetooth and Bluetooth low energy receiver Fullspeed Bluetooth operation with full piconet and scatternet support BlueCore CSR8811 A06 05mm WLCSP Bluetooth v40 Bluetooth low energy Production Information CSR8811A06ICXRR Issue 3 flame retardants Optimised for use on lowcost PCBs Onchip balun and minimal ......

Features
BlueCore
®
CSR8811™ A06 0.5mm WLCSP
Bluetooth v4.0
Bluetooth low energy
Production Information
CSR8811A06-ICXR-R
Issue 3
Dual-mode Bluetooth
®
/Bluetooth low energy
radio
Fully qualified Bluetooth v4.0 IC
Can form part of Bluetooth v4.0 + HS system
Class 1 or Class 2 Bluetooth power levels
High-sensitivity Bluetooth and Bluetooth low
energy receiver
Full-speed Bluetooth operation with full piconet
and scatternet support
On-chip balun and minimal BOM
Low-power selectable 1.2 to 3.6V I/O
Integrated I/O and core regulators
High-speed UART port (up to 4Mbps)
PCM/I
2
S digital audio interface
Support for IEEE 802.11 coexistence
Green (RoHS and no antimony or halogenated
flame retardants)
Optimised for use on low-cost PCBs
ril
1
5,
20
14
CSR8811 A06 0.5mm pitch WLCSP
Data Sheet
General Description
The CSR8811™ is a product from CSR's Connectivity
Centre. It is a single-chip radio and baseband IC for
Bluetooth 2.4GHz systems including EDR to 3Mbits/s
and Bluetooth low energy.
CSR8811's dual-mode radio enables it to connect to
the billions of Bluetooth products already on the
market, as well as a new generation of Bluetooth low
energy devices.
Bluetooth low energy allows mobile devices to
exchange simple data sets with very low consumption.
Example use cases include watches, medical sensors
and fitness trainers that can operate for many years
from a small coin cell battery. CSR8811 brings
Bluetooth low energy to the mobile phone, allowing it
to connect to this new class of devices.
CSR8811 is pin-compatible with future CSR chips that
will add support for:
Wideband speech
On-chip SBC or aptX encoding for streaming
stereo audio with A2DP
It is also pin-compatible with the CSR8810 Bluetooth
v3.0 IC. This makes it easy to upgrade products to the
latest Bluetooth features without changing PCB
design.
When used with CSR Synergy Software™ and a CSR
UniFi
®
wireless chip, CSR8811 provides a system
fully qualifiable to the Bluetooth v4.0 + HS system for
faster file transfer.
Production Information
This Material is Subject to CSR's Non-Disclosure Agreement
© Cambridge Silicon Radio Limited 2011
Pr
ep
ar
ed
fo
rx
ia
ns
he
ng
pe
ng
-d
sp
an
.n
Applications
Low-cost phones, Feature phones, Smartphones
Personal Navigation Devices (PNDs)
Portable media Players (PMPs)
This family of Bluetooth products that include:
CSR8311™ A06 for automotive applications
CSR8510™ A06 for PCs and USB dongles
Products requiring a standalone Bluetooth low energy
radio should use CSR1000 or CSR1001 ICs.
CSR designed CSR8811 to reduce PCB area and the
number of external components:
The high-power Class 1 Bluetooth transmitter
removes the requirement for external
amplification.
The balun is integrated, which results in a single-
ended 50Ω port that does not require additional
matching components.
Integrated LDOs, with minimum decoupling
components, allow the chip to be operated directly
from the battery or a regulated supply.
No requirement for external inductors.
This ensures that production costs are minimised.
The device incorporates auto-calibration and BIST
routines to simplify development, type approval and
production test.
To improve the performance of both Bluetooth and
IEEE 802.11b/g/n co-located systems a wide range of
coexistence features are supported.
et
-
Tu
es
da
y,
Ap
Page 1 of 64
CS-215672-DSP3
www.csr.com
Device Details
Bluetooth low energy
Dual mode Bluetooth low energy radio
Supports simultaneous Bluetooth BR/EDR and
multiple low energy connections
Support for on-chip AES encryption
Adaptive Bluetooth/Bluetooth low energy scheduler
On-chip whitelist support
Bluetooth Radio
On-chip balun (50Ω impedance in TX and RX
modes)
No external trimming is required in production
Bluetooth v4.0 specification compliant
Bluetooth Transmitter
Class 1, Class 2 and Class 3 support without need
for external power amplifier or TX/RX switch
DQPSK and 8DPSK
Bluetooth Receiver
Integrated channel filters
Digital demodulator for improved sensitivity and co-
channel rejection
Real time digitised RSSI available on HCI interface
Fast AGC for enhanced dynamic range
Channel classification for AFH
DQPSK and 8DPSK
Baseband and Software
Internal RAM allows full-speed data transfer, mixed
voice and data, and full piconet operation, including
all medium rate packet types
Logic for forward error correction, header error
control, access code correlation, CRC,
demodulation, encryption bit stream generation,
whitening and transmit pulse shaping. Includes
support for eSCO and AFH
Transcoders for A-law, µ-law and linear voice from
host and A-law, µ-law and CVSD voice over air
Bluetooth Stack
CSR's Bluetooth Protocol Stack runs on the on-chip
MCU in the configuration Standard HCI over UART
Synthesiser
Fully integrated synthesiser requires no external
VCO varactor diode, resonator or loop filter
Compatible with external clock 19.2MHz to 40MHz
Can be operated from external crystal
Physical Interfaces
UART interface with programmable baud rate up to
4Mbits/s
BCSP, H4, H4DS and H5 support
PCM/I
2
S interface
Synchronous serial interface up to 4Mbits/s for
system debugging
Auxiliary Features
Power management includes digital shutdown, and
wake up commands with an integrated low power
oscillator for ultra low power Park/Sniff/Hold mode
Auto Baud Rate setting, depending on host
interface
On-chip linear regulators:
1.8V output from typical 2.5 to 4.8V (5.5V for
short periods) input (load current 100mA)
Low dropout linear regulators producing
internal supply voltages from 1.8V, and
allowing operation directly from a battery
Power-on-reset cell detects low supply voltage
Arbitrary sequencing of power supplies is permitted
Package
28-ball 2.57 x 3.21 x 0.6mm, 0.5mm pitch WLCSP
Can be used on low-cost PCBs without the need for
blind vias
ril
1
5,
20
14
CSR8811 A06 0.5mm pitch WLCSP
Data Sheet
Production Information
This Material is Subject to CSR's Non-Disclosure Agreement
© Cambridge Silicon Radio Limited 2011
Pr
ep
ar
ed
fo
rx
ia
ns
he
ng
pe
ng
-d
sp
an
.n
et
-
Tu
es
da
y,
Ap
Page 2 of 64
CS-215672-DSP3
www.csr.com
Functional Block Diagram
15
,2
01
4
CSR8811 A06 0.5mm pitch WLCSP
Data Sheet
Production Information
This Material is Subject to CSR's Non-Disclosure Agreement
© Cambridge Silicon Radio Limited 2011
Pr
ep
ar
ed
fo
rx
ia
ns
he
n
g
pe
ng
-d
sp
an
.n
et
-
Tu
es
da
y,
Ap
ril
Page 3 of 64
CS-215672-DSP3
www.csr.com
Document History
Revision
1
2
3
Date
21 JUN 11
14 JUL 11
14 JUL 11
Change Reason
Original publication of this document.
Updating to Production Status.
Updated Sleep Clock section.
If you have any comments about this document, email
Comments@csr.com
giving
the number, title and section with your feedback.
ril
1
5,
20
14
CSR8811 A06 0.5mm pitch WLCSP
Data Sheet
Production Information
This Material is Subject to CSR's Non-Disclosure Agreement
© Cambridge Silicon Radio Limited 2011
Pr
ep
ar
ed
fo
rx
ia
ns
he
ng
pe
ng
-d
sp
an
.n
et
-
Tu
es
da
y,
Ap
Page 4 of 64
CS-215672-DSP3
www.csr.com
Status Information
The status of this Data Sheet is Production Information.
CSR Product Data Sheets progress according to the following format:
Advance Information
Information for designers concerning CSR product in development. All values specified are the target values of the
design. Minimum and maximum values specified are only given as guidance to the final specification limits and must
not be considered as the final values.
Pre-production Information
All electrical specifications may be changed by CSR without notice.
Production Information
Production Data Sheets supersede all previous document versions.
Life Support Policy and Use in Safety-critical Applications
CSR's products are not authorised for use in life-support or safety-critical applications. Use in such applications is
done at the sole discretion of the customer. CSR will not warrant the use of its devices in such applications.
CSR8811 devices meet the requirements of Directive 2002/95/EC of the European Parliament and of the Council
on the Restriction of Hazardous Substance (RoHS).
CSR8811 devices are also free from halogenated or antimony trioxide-based flame retardants and other hazardous
chemicals. For more information, see CSR's
Environmental Compliance Statement for CSR Green Semiconductor
Products
.
Trademarks, Patents and Licences
Unless otherwise stated, words and logos marked with
or
®
are trademarks registered or owned by CSR plc or its
affiliates. Bluetooth
®
and the Bluetooth
®
logos are trademarks owned by Bluetooth
®
SIG, Inc. and licensed to
CSR. Other products, services and names used in this document may have been trademarked by their respective
owners.
The publication of this information does not imply that any license is granted under any patent or other rights owned
by CSR plc and/or its affiliates.
CSR reserves the right to make technical changes to its products as part of its development programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept
responsibility for any errors.
Refer to
www.csrsupport.com
for compliance and conformance to standards information.
Production Information
This Material is Subject to CSR's Non-Disclosure Agreement
© Cambridge Silicon Radio Limited 2011
Pr
ep
ar
ed
fo
rx
ia
ns
he
ng
pe
ng
CSR Green Semiconductor Products and RoHS Compliance
-d
sp
an
.n
et
-
Final Data Sheet including the guaranteed minimum and maximum limits for the electrical specifications.
Tu
es
da
y,
Pinout and mechanical dimension specifications finalised. All values specified are the target values of the design.
Minimum and maximum values specified are only given as guidance to the final specification limits and must not be
considered as the final values.
ril
1
5,
20
All detailed specifications including pinouts and electrical specifications may be changed by CSR without notice.
14
CSR8811 A06 0.5mm pitch WLCSP
Data Sheet
Ap
Page 5 of 64
CS-215672-DSP3
www.csr.com
展开预览

猜您喜欢

评论

登录/注册

意见反馈

求资源

回顶部

推荐内容

热门活动

热门器件

随便看看

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
×