1.QuartusII对代码进行时序仿真时出现Error: Can't continue timing simulation because delay annotation information for design is missing.2.在下载运行的时候,出现下面的错误:Warning: The JTAG cable you are using is not supported for
[i=s] 本帖最后由 liutogo 于 2015-1-24 22:24 编辑 [/i]不知道怎么了,在IAR里面新建的工程,所有的都.c文件都报警告,虽然不影响程序的运行,但就是看着不舒服。Warning[Pa050]: non-native end of line sequence detected (this diagnostic is only issued once) E:\Proje
评论